BIOS Settings for the Gigabyte GA-G31M-ES2L motherboard with F8 BIOS
Standard CMOS Features:
Date: [set]
Time: [set]
Drive A: [None]
Floppy 3 Mode Support: [Disabled]
Halt On: [No Errors]
Advanced BIOS Features:
Hard Disk Boot Priority: [set your boot drive as #1]
First Boot Device: [CDROM]
Second Boot Device: [Hard Disk]
Third Boot Device: [Disabled]
Password Check: [setup if desired]
HDD S.M.A.R.T. Capability: [Enabled]
Limit CPUID Max. to 3: [Disabled]
No-Execute Memory Protect: [Enabled]
CPU Enhanced Halt (C1E): [Enabled]
CPU Thermal Monitor 2 (TM2): [Enabled]
CPU EIST Function: [Enabled]
Init Display First: [PEG]
Onboard VGA: [Enable If No Ext PEG]
Integrated Peripherals:
On-Chip Primary PCI IDE: [Enable]
On-Chip Secondary PCI IDE: [Enable]
On-Chip SATA Mode: [Auto]
USB Controller: [Enabled]
USB 2.0 Controller: [Enabled]
USB Keyboard Support: [Enabled]
USB Mouse Support: [Enabled]
Legacy USB storage detect: [Enabled]
Azalia Codec: [Auto]
Onboard H/W LAN: [Enabled]
SMART LAN: [Ignore]
Onboard LAN Boot ROM: [Disabled]
Onboard Serial Port 1: [Disabled]
Onboard Parallel Port: [Disabled]
Power Management Setup:
ACPI Suspend Type: [S3(STR)]
Soft-Off by PWR-BTTN: [Instant-Off]
PME Event Wake Up: [Disabled]
Power On by Ring: [Disabled]
Resume by Alarm: [Disabled]

Power Management Setup: 
HPET Support: [Enabled]
HPET Mode: [64-bit Mode]
Power On By Mouse: [Disabled]
Power On By Keyboard: [Disabled]
AC Back Function: [Soft-Off]